Quick Cooling by 10℃, with a Cooling Capacity of 1500W. A Household Portable Compressor Air Conditioner.

Refrigeration: Refrigeration capacity; 1200w-1500w
Refrigeration power 280W
Fresh air volume 120M³ /h

Heating: Heating capacity; 1200w
Refrigeration power 240w
Fresh air volume 120M³ /h

Dehumidification: Dehumidification capacity; 10L per day
Dehumidification function; 300W

Humidification: Humidification amount; 1L/h
Humidification function 220w

Fan: Air volume 120M³/h
Power; 19W

Ventilation: Air volume 120M³/h
Power; 19W

Description

The World’s First Air-Cooled Portable Air Conditioner

The portable air-cooling air conditioner is compact in size and integrates multiple functions such as cooling, dehumidification, humidification, and ventilation all in one. It features an innovative steam-cooling energy-saving technology, resulting in an energy efficiency ratio close to 5.0. The total input power of this product is approximately 300W (if a double-rotor compressor is used, the power is lower than 300W), with a cooling capacity of up to 1500W. It is suitable for use in trucks, campers, outdoor tents, temporary houses, and can also be used in 6-8 square meter residences.

 

                 This Air Conditioner Features A Small Size, Light Weight, Energy-Saving And Power-SavingPerformance, No Need For Installation, And No Need For Drainage. It Is Undoubtedly The Most Ideal Choice For Outdoor Travel Life, Such As In RVs, Parking Lots, Tents, Etc.; For Indoor Use, Its Ventilation And Moisture Retention Functions Are Very Good For People Who Care About Health And Beauty; Due To The Indoor Negative Pressure Effect, The Ventilation Efficiency Is High, And It Also Has A Very Good Improvement Effect On The Odor Problem In Rooms For The Elderly And Infants.

 

 

Product Features:
1. The weight of the bare machine is only 12Kg, and the minimum power consumption for refrigeration is 260W; it is small in size, light in weight, energy-saving and power-efficient, does not require installation, and does not require drainage.
2. It displays the environmental temperature and humidity. It displays the current environmental temperature and humidity during standby or operation.
3. It can control the temperature and humidity in different operating states.
4. In the cooling mode, it needs to be connected to the exhaust pipe. The exhaust temperature is low, and at the same time, indoor ventilation is achieved to maintain indoor humidity.
5. In the heating mode, it needs to be connected to the exhaust pipe to achieve indoor ventilation and increase indoor humidity.
6. In the dehumidification mode, it does not need to be connected to the exhaust pipe. It requires drainage, and operates the same as the existing dehumidifier.
7. In the humidification mode, it does not need to be connected to the exhaust pipe. It requires adding water, and is the same as the existing humidifier.
8. In the fan mode, it is consistent with a regular fan.
9. In the ventilation mode, it needs to be connected to the exhaust pipe. It is the same as the ventilation fan, refreshing the indoor air.
10. In the ventilation + fan mode, it needs to be connected to the exhaust pipe. It is the same as the ventilation fan, quickly refreshing the indoor air.

Usage Notes:
Please pay special attention to the following points:
1. The air conditioner body must be placed flat and cannot be used at an angle. Otherwise, water leakage will occur and the air conditioner will not operate normally.
2. After filling the water bucket with water, the lid must be tightened. When the water bucket is inverted, there will be no water leakage, and then it can be placed upside down on the air conditioner.
3. If bubbles keep emerging after the water bucket is filled, it indicates that the lid is not properly installed. It is necessary to re-tighten the lid. Otherwise, water leakage will occur.
4. When the water bucket is placed on the air conditioner, the air conditioner will not start running. If there are bubbles, the water bucket should be removed in time to prevent water leakage from the air conditioner.
5. If the air conditioner is left on standby for a long time, the water bucket should be removed and the water in the air conditioner should be discharged through the drainage pipe.
6. When the air conditioner needs to be moved, the water bucket should be removed and the water in the air conditioner should be discharged through the drainage pipe.
7. When replacing the water in the water bucket, the water bucket should be removed, and the water in the air conditioner should be discharged through the drainage pipe. Then, install the water bucket filled with water on the air conditioner.
8. Before replacing the water in the water bucket, the water bucket should be removed, and the water in the air conditioner should be discharged through the drainage pipe.